Performance of the complete travel-time equation of state at simultaneous high pressure and temperature     

Hartmut A. Spetzler  Akira Yoneda 《Pure and Applied Geophysics》1993,141(2-4):379-392

The complete travel-time equation of state (CT-EOS) is presented by utilizing thermodynamics relations, such as; $$K_T = K_S (1 + \alpha \gamma T)^{ - 1} , \gamma = \frac{{\alpha K_S }}{{\rho C_P }}, \left. {\frac{{\partial C_P }}{{\partial P}}} \right)_T = - \frac{T}{\rho }\left[ {\alpha ^2 + \left. {\frac{{\partial \alpha }}{{\partial T}}} \right)_P } \right], etc.$$ The CT-EOS enables us to analyze ultrasonic experimental data under simultaneous high pressure and high temperature without introducing any assumption, as long as the density, or thermal expansivity, and heat capacity are also available as functions of temperature at zero pressure. The performance of the CT-EOS was examined by using synthesized travel-time data with random noise of 10^?5 and 10^?4 amplitude up to 4 GPa and 1500 K. Those test conditions are to be met with the newly developed GHz interferometry in a gas medium piston cylinder apparatus. The results suggest that the combination of the CT-EOS and accurate experimental data (10^?4 in travel time) can determine thermodynamic and elastic parameters, as well as their derivatives with unprecedented accuracy, yielding second-order pressure derivatives (?² M/?P ²) of the elastic moduli as well as the temperature derivatives of their first-order pressure derivatives ?² M/?P?T). The completeness of the CT-EOS provides an unambiguous criterion to evaluate the compatibility of empirical EOS with experimental data. Furthermore because of this completeness, it offers the possibility of a new and absolute pressure calibration when X-ray (i.e., volume) measurements are made simultaneously with the travel-time measurements.  相似文献   

Experimental study on the velocity of fragments in collisional breakup     

Akira Fujiwara  Akimasa Tsukamoto 《Icarus》1980,44(1):142-153

The motion of fragments following a catastrophic destruction by either a normal or an oblique impact at 2.5–2.9 km sec^?1 into cubic and spherical basalt targets was studied with a high-speed framing camera. Velocities at the antipodes of the targets vary as (E/M)^0.75 (E = impact energy; M = target mass) and are lower than 200 m sec^?1 at E/M ? 10⁹ ergs g^?1. Excluding fine-grained particles from the impact site, 70 to 80% by mass fraction of the fragments have velocities lower than twice the antipodal velocity. Comminution and ejection energies wasted in this mass fraction were a few percent of the impact energy at E/M ? 5 × 10⁷ ergs g^?1. During a catastrophic impact into asteroids some of the fragmented bodies can be reconcentrated by mutual gravitation.  相似文献   

Dendritic cordierite in argillaceous hornfels from the Toki area,Gifu Prefecture,central Japan     

Akira Miyake 《Contributions to Mineralogy and Petrology》1990,104(4):390-396

Dendritic cordierite occurs in argillaceous hornfels from the Toki area, Gifu Prefecture, Japan. The cordierite crystal consists of c-arms elongated parallel to the c-axes and a-arms perpendicular to the c-axis. The latter arms could be divided into six kinds of untwinned a-arms with different growth directions elongated parallel to the respective a-axis and twinned a-arms elongated parallel to the (110) twin plane. A-arms branch out from c-arms or other a-arms with different growth directions and c-arms sometimes branch out from a-arms, leading to a tree-like structure. Each of the c-arms contains three kinds of domains related by a three-fold axis about the c-axis. These domains are irregularly distributed without any relation to the shape of the c-arm and the domain boundaries are of zigzag shape. This domain arrangement suggests that c-arms grew as hexagonal cordierite and were later transformed into orthorhombic cordierite. The fact that each untwinned a-arm has a fixed growth direction to its orientation suggests that the a-arms grew as an orthorhombic cordierite. From the growth directions of c- and a-arms, orthorhombic and hexagonal phases are considered to grow preferentially along the c- and a-axes, respectively. The branching of a new arm is explained by nucleation on an old arm with a different preferred growth direction. The preferential growth is discussed in terms of a significant chemical potential gradient of the cordierite component. This has been preserved in the mineral zoning observed in the matrix around the cordierite porphyroblast.  相似文献   

Controlled experiment in the ionosphere with a rocket-borne plasma gun     

Nobuki Kawashima  Susumu Sasaki  Osamu Kaneko  Akira Yamori  Ryo Okamura  Shoichi Okamura 《Planetary and Space Science》1978,26(4):367-373

A controlled active experiment was performed by a plasma gun on-board a rocket to study the plasma stream across the magnetic field in space. A mother and daughter system was employed. An 8 kV 0.8 μF (25 J) capacitor bank on the daughter rocket was discharged every 12 s and about 10¹⁶ ion and electron pairs were ejected. A plasma signal was detected on the electron temperature probe. The propagation speed of the plasma stream is estimated to be 10⁶ cm/s, considerably lower than that obtained in the prelaunch test. The amplitude of the plasma signal decays as the inverse square of the mutual distance between the mother and daughter rockets and this decay is much slower than the free streaming. The importance of the geomagnetic field on the plasma propagation in space is discussed.  相似文献   

Metallogenesis of Porphyry Cu Deposits of the Western Luzon Arc, Philippines: K-Ar ages, SO₃ Contents of Microphenocrystic Apatite and Significance of Intrusive Rocks     

Akira IMAI 《Resource Geology》2002,52(2):147-161

Abstract: K–Ar ages of the following porphyry Cu deposits in the western Luzon arc are determined: Lobo-Boneng (10.50.4 Ma), Santo Niño (9.50.3 Ma), Black Mountain (2.10.1 Ma), Dizon (2.50.2 Ma) and Taysan (7.30.2 Ma). Microphenocrys-tic apatite in the late Cenozoic intermediate to silicic intrusions associated with porphyry Cu deposits in the western Luzon arc contains sulfur as SO₃ detectable by electron probe microanalyzer. Sulfur is supposed to have been accommodated dominantly as oxidized species in oxidizing hydrous magmas that generated porphyry Cu deposits. Likewise, such high SO₃ contents in microphenocrystic apatite are common characteristics of the intermediate to silicic magmatism of the western Luzon arc, from tonalitic rocks of the Luzon Central Cordillera of about 15 Ma to an active magmatism at Mount Pinatubo. Thus, the western Luzon arc has been generating porphyry Cu mineralization associated with oxidizing hydrous intermediate to silicic magmatism related to eastward subduction, since Miocene to the present day. Intermediate to silicic rocks since 15 Ma to present-day western Luzon arc generally show high whole-rock Sr/Y ratio ranging from 20 to 184. However, porphyry Cu deposit is not necessarily related to the rocks that show higher Sr/Y ratios compared to the other barren rocks in the western Luzon arc. The characteristics of the intermediate to silicic magma associated with porphyry Cu deposit are not attributed to the composition of the source material of the magma, but to the properties defined by the high activity of oxidized species of sulfur in the fluid phase that is encountered during the generation of intermediate to silicic magmas.  相似文献   

Attenuation of coda waves and Q _c value beneath the Chengdu telemetered seismic network     

Jian Zeng  Tian-Chang Chen  Wei-Bin Han  Jun Fan  Si-Hua Zheng  Akira Hasegawa  Shigeki Horiuchij  Satoshi Matsumoto 《地震学报(英文版)》1997,10(3):313-320

Based on the single scattering model of coda power spectrum analysis, digital waveform data of 50 events recorded by the real-time processing system of the Chengdu telemetry network are analyzed to estimate the Q _c values of earth medium beneath the Chengdu telemetry network for several specified frequencies. It is found that the Q _c shows the frequency dependency in the form of Q _c = Q ₀ f ⁿ in the range of 1.0 to 20.0Hz. Estimated Q ₀ ranges from 60.83 to 178.05, and n is found to be 0.713 to 1.159. The average value of Q ₀ and n are 117 and 0.978 respectively. This result indicates the strong frequency dependency of the attenuation of coda waves beneath the Chengdu telemetry network. Comparing with the results obtained in other regions of the world, it is found that Q ₀ ⁻¹ value and its change with frequency are similar to those in regions with strong tectonic activity. This subject is supported by the Ministry of Personnel, China for partly sponsoring.  相似文献   

Corrections to Vesicle layering in solidified intrusive magma bodies: a newly recognized type of igneous structure     

Atsushi Toramaru  Akira Ishiwatari  Maki Matsuzawa  Masaru Nakamura  Shoji Arai 《Bulletin of Volcanology》1997,58(8):655-656

  相似文献   

Occurrence of Halogen-rich Phlogopite in Late Cenozoic Volcanic Rocks in the Japanese Arcs     

Akira Imai 《Resource Geology》2004,54(2):153-166

Abstract. Halogen-rich phlogopite occurs in the groundmass of andesite and dacite lavas from Late Tertiary to Quaternary volcanoes associated with native sulfur and limonite deposits (Shiretoko-Iwozan, Hachimantai, Adatara, Omeshidake, Masaki) and hydrothermal ore deposits (Harukayama, Muineyama, Hishikari) in Japan. The F contents of the halogen-rich phlogopite range from 3.6 to 5.7 wt%, corresponding to atomic F/(F+C1+OH) ratios ranging from 0.45 to 0.69. On the other hand, the Cl contents of the halogen-rich phlogopite are around 0.2 wt%. The atomic Mg/(Mg+Fe) ratios range from 0.69 to 0.83.
The fluorine intercept value [IV(F)] defined by Munoz (1984) of the phlogopites ranges from 0.79 to 3.17, and the chlorine intercept value [IV(Cl)] ranges from -7.11 to -7.77. The observed IV(F) of the phlogopites broadly overlap the range of the IV(F) for biotites from porphyry copper deposits. On the other hand, the observed IV(Cl) are significantly lower than the IV(Cl) for biotites from porphyry copper deposits. Whereas the F contents of the phlogopite appear more prominent compared to the Cl contents, the calculation of halogen intercept values revealed that the phlogopites are enriched in Cl with respect to the element distribution effect of Mg-Fe substitution. Since the degree of Cl enrichment of the phlogopite is more significant compared to that of biotite in porphyry copper deposits, the phlogopites are considered to have formed under the condition of significantly high activity of halogens. Hydrothermal ore deposits may be formed in magmatic hydrothermal system associated with volcanoes where halogen-rich phlogopite is formed by hypersaline fluid.  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines     

Akira Imai 《Resource Geology》2005,55(2):73-90

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.  相似文献